Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

The mechanisms of decomposition of the 1- and 2-phenyltetralin radical cations

Mechanisms for decomposition of 1- and 2-phenyltetralins were investigated using low resolution mass spectrometry and metastable ion techniques. Four primary decompositions were observed for 1-phenyltetralin radical cations: (1) the loss of C₆H₆ via a 1,4-elimination; (2) the elimination of ethene via competing losses from carbons 3 + 4 and carbons 2 + 3; (3) the loss of C₈H₈, probably through a stepwise Diels-Alder cycloreversion to expel styrene; and (4) the loss of methyl radical involving carbon 2 and possibly carbon 4. Three major decompositions were observed for 2-phenyltetralin radical cations: (1) the loss of C₈H₈, possibly through a Diels-Alder cycloreversion to expel styrene; (2) the loss of C₆H₆ via a 1,3 elimination; and (3) the loss of methyl radical from carbon 1. Various exchange reactions occur prior to these losses, but they proved to be incomplete even for metastable ions.     

Conformational deformation of ring C in 14β-estra- 1,3,5(10) 15-tetraen-17-ones

High-field n.m.r. analysis of four 3-methoxy-14β-estra-1,3,5(10), 15-tetraen-17-ones provides evidence for conformational deformation of ring C to a twist-boat form in solution. These observations are supported by molecular mechanics (MM2) calculations, which predict that the ring C chair and ring C twist-boat conformers have similar steric energies, slightly favouring the latter. An X-ray crystal structure determination on 3-methoxy-14-methyl-14β-estra-1,3,5(10), 15-tetraen-17-one revealed that ring C does indeed adopt a twist-boat conformation in the solid state.     

Electrochemical oxidation of alkyl-substituted allenes in methanol

Mono-, di- and tri-alkyl-substituted allenes were potentiostatically oxidized in methanol at graphite and Pt anodes. At the former electrode, α-methoxylated ketones (due to 4F/mole electricity consumption) and esters (6F/mole) were the major products. At a Pt anode, intermediate products such as vinyl-ether derivatives (2F/mole) were characterised too. Unlike the anodic oxidation of alkenes and alkynes previously reproted in the literature, dimerisation is not a typical process in the allenes' oxidation, since of all the products obtained only a sole dimer has been observed. The mechanism for the formation of most products is discussed.     

The synthesis of macrocyclic polyether-diesters incorporating 1,10-phenanthrolino and 1,8-naphthyridino subunits

The preparation of a series of macrocycles, formed by reaction of HO-(-CH₂-CH₂-O-)_nH with 1,10-phenanthroline-2,9-dicarbonyl chloride (n = 2,3,4) and 1,8-naphthyridine-2,7-dicarbonyl chloride (n = 3,4), is described. An improved synthetic route to 2,7-dimethyl-1,8-naphthyridine 9 is also reported.     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

Kinetics of the interconversion of parahydrogen and orthohydrogen catalyzed by paramagnetic complex ions

The rate constants of para-/orthohydrogen (p-/o-H2) nuclear spin isomerization have been measured by means of 1H NMR in deuterated solvents at 298.2 K. The indicated reaction is catalyzed by paramagnetic complex ions giving rate constants that are proportional to the concentrations of the catalysts. The second-order rate constants are directly proportional to the squares of the magnetic moments for the solvated metal complexes for two classifications: M(solv)m2+, M = 3d transition metals; Ln(solv)n3+, where in 1:9 D2O-CD3CN the aqua complexes are the predominant species, Ln = lanthanides. The other 3d transition metal complexes with different ligands show rate constants that also depend on the sizes of ligands. Whereas the correlation between the second-order rate constants and magnetic moments is consistent with Wigner's theory, the size of catalyst shows a more modest effect on the rate constants than expected. The effective collision radii of the complexes, calculated from the rate constants, proved to be approximately constant for each series of solvated metal complexes.